Samsung Galaxy S 2Model GT-I9500

Samsung Galaxy S 2 GT i9100 Flash Tutoriall

How To Install / Flash Firmware on Samsung Model: GT-I9500

This Tutorial is about flashing firmware on your Samsung Galaxy S2 GT i9100. I posted a step by and easy tutorials , please read complete guide once and then apply , if you skip any step then you will brick your phone.

Disclaimer: Follow this Guide on your risk and if your device gets damaged or bricked during the process, AndroidFlip.com is not responsible. Please read all warnings and notes and follow steps carefully

(I) Know about everything

There are some things that you may know before flashing firmware on your phone , little bit huge so we separated it here – FAQ about firmware flashing on Samsung androids
(II) Preparing Your phone

1. Go to settings>>applications>>development and enable usb debugging

2. Follow this guide – Preparing your Android phone before upgrading / installing firmware

If you have rooted phone or using any custom ROM Then you will have to clear cache and wipe data which can done by booting your phone in recovery mode and select Wipe data/factory reset and also



Model: GT-I9500

Model name: GALAXY S4

Country: Kazakhstan (Black Edition)

Version: Android 4.4.2

Changelist: 699287

Build date: Wed, 28 May 2014 14:23:46 +0000

Product Code: SKZ

PDA: I9500XXUFNE7

CSC: I9500YXEFNE3

MODEM: I9500XXUFNA6

Instructions

    Extract (unzip) the firmware file
    Download Odin v3.09
    Extract Odin zip-file
    Open Odin v3.09
    Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
    Connect phone and wait until you get a blue sign in Odin
    Add the firmware file to AP / PDA
    Make sure re-partition is NOT ticked
    Click the start button, sit back and wait a few minutes


Download Firmware And Flash Tools
Download